Exercise 2.8 - Autoradiography
- H-Thymidine, specific activity of 2.0
- Onion sets, jars and toothpicks
- Alcohol-acetic acid fixative
- Materials for feulgen reaction (Exercise 2.4)
- Paraffin embedding, sectioning equipment
- Kodak Nuclear Track Emulsion (or equivalent)
- Water bath at 42° C
- Kodak D19 Developer
- Kodak Fixer
- Xylol, Permount and coverslips
- Carefully read and follow all precautions for the safe
handling of radioactive materials (Appendix H).
- Place toothpicks into the sides of an onion and set the
onion into the top of a small jar or beaker. Fill the jar
with water and allow the onion to begin root development (3-
7 days). Mild aeration of the water will assist in the
growth of the roots.
- Set up another beaker, containing a 10 µ /ml solution of
such that there are approximately 10 µc/ml, transfer the onion
and its growing roots to the jar containing the radioactive
- Allow the roots to stay in the radioactive solution for
1 hour at room temperature.
- Remove the onion and hold the bulb over a beaker
containing water. Rinse the onion roots by dipping several
times in the beaker. Transfer the bulb to yet another beaker
of aerated water and allow to remain in this beaker for four
- Cut off the roots tips and fix in alcohol-acetic acid
(3:1) overnight. Change the fixative after the first four
- Wash the roots in water for several minutes and place in
1N HCl at 60° C for 12 minutes.
- Stain the root tips with the Feulgen Reaction as given
in Steps 3.b-3.e of Exercise 2.5.
- Dehydrate the root tips, embed in paraffin and section
at 10-15 microns. Mount on microscope slides.
- Deparaffinize in xylol and rehydrate sections by passing
first through a series of alcohols and finally in two
changes of water.
- In a dark room
melt some liquid autoradiographic emulsion at a water bath
at 42° C.
- Place two slides back-to-back and dip slowly into the
melted emulsion. Remove, allow to drain and place in an
appropriate light-proof container and allow them to dry in a
- When dry, place the slides into an opaque slide box
containing drierite. Wrap in aluminum foil and place in a
- The slides must stay in the refrigerator until a proper
exposure has been made. This can vary from 5 days to over
two weeks. After one week, a trial slide should be developed
using Steps 15 and 16 below. Examine the slide at 10X with a
bright field microscope and look for the presence of black
silver grains located over the cells. A correct exposure is
determined by the appearance of silver grains over the
cells, but few or no silver grains located in areas without
cells. If the appearance of the trial slide is correct, then
the remainder should be processed immediately. Repeat an
additional trial slide in 2-3 days, and repeat every three
days thereafter until an adequate exposure is obtained.
- Develop the autoradiogram emulsion in the darkroom as
- Develop in Kodak D-19 Developer at 20° C
for 3 minutes.
- Wash for 10 seconds in distilled water.
- Fix with Kodak Fixer for 3 minutes.
- Wash in running water for 15 minutes.
- Dehydrate by placing in 95% alcohol for 3 minutes.
- Place in 100% alcohol for 3 minutes.
- Clear in two changes of xylol for 3 minutes each.
- Mount coverslip with Permount.
- Draw and label the autoradiograms in the space provided
on the following page. Calculate the percent of cells
actively undergoing DNA synthesis during the time of
exposure to radioactive thymidine.
Note that the tissue and the silver grains are in
different planes of focus and you will need to constantly
switch focus from one plane to the other.
Drawing of thymidine incorporation
This procedure involves the incorporation of a
radioactive substance into a cell, and subsequent detection
of that material through the use of a photographic emulsion.
The primary source used for cell biology is an organic
molecule containing tritium, the radioactive form of
hydrogen. Radioactive carbon, phosphorous and iodine are
occasionally utilized, but tritium has inherently more
resolution than any of the others.
Tritiated thymidine (H-thymidine)
is often used, for example, to study the synthesis and location
of DNA. Thymidine is a soluble base which is specific to
DNA. It is incorporated into the macromolecular structure of
DNA during synthesis and replication of the chromosomes.
Upon fixing the cells for standard histological examination,
the DNA molecules (with their incorporated, radioactive,
thymidine) are precipitated or cross-linked as permanent
parts of the cell. Un-incorporated thymidine is removed from
the cell, as it remains soluble and is disposed of in the
tissue washing procedures.
When the tissues are sectioned and applied to a glass
slide, they will contain radioactive nuclei, but only those
nuclei that were in the S phase of division during the
exposure of the cells to H-thymidine.
Radioactive sources can not be detected directly, but if a
photographic emulsion is applied directly over the section,
it will become exposed by the radioactive source.
When the photographic emulsion is subsequently
processed (i.e. developed), the exposed portions of the
emulsion will contain reduced silver grains in direct
proportion to the amount of radiation being given off
beneath it (in the nuclei of our example).
If the exposed, developed slides are now examined with
a microscope, there will be two layers of interest. Focusing
the microscope on the tissue itself will give a view of the
tissue and cell architecture. If the focus of the microscope
is moved upward, however, the cells will go out of focus,
exactly as the photographic emulsion comes into focus.
Within the emulsion will be areas of reduced silver grains
and clear areas containing no silver grains. By alternately
focusing on the tissue and the emulsion, those nuclei that
are radioactive can be readily identified.
If desired, the number of silver grains could be
counted to give a quantitative measure of H-
thymidine incorporation (and thus DNA synthesis), although
this is a rather complex procedure to control, with any
Return to Table of Contents
Cell Biology Laboratory Manual
Dr. William H. Heidcamp, Biology Department, Gustavus Adolphus College,
St. Peter, MN 56082 -- firstname.lastname@example.org